Accessories

Accessories that compliment AirClean Systems products are designed to provide user friendly features for mobility or storage of laboratory equipment and chemicals. Custom sturdy carts and stands provide added options for fume hood placement within the laboratory. Polypropylene fume hoods have the options of both vented and non-vented polypropylene storage cabinets. The vented cabinets are connected to the fume hood filtration package and provide a slight negative pressure.

Aldehyde Master Spill Kit

Aldehyde Master Spill Kit

  • The Aldehyde Clean-Up Kit is compact and can be placed near the point of use as The Joint Commission Hazardous Material Plan requires. Each kit contains materials to effectively neutralize and clean-up small spills.

More Info Get Quote

Carts

Carts

  • Our white, epoxy-coated carts are constructed of 1.5″ tube stock 14-guage cold-rolled steel with locking casters. All carts feature a two-position moveable base bar for wheelchair or lab chair compatibility. Standard height of 34" meets ADA requirements.

More Info Get Quote

Fixtures

Fixtures

  • Fixtures are available on all sliding sash ductless fume hoods and AirMax polypropylene total exhaust fume hoods. They are installed and color coordinated, per international standards, on each post.

More Info Get Quote

Glycinex Disinfectant Neutralizer

Glycinex™ Disinfectant Neutralizer

  • Glycinex completely neutralizes disinfectant in five minutes. Each pre-measured packet is simple to use and can be added to a container of disinfectant or applied to a spill in seconds. A noticeable color change will occur during deactivation.

More Info

SDS Sheet Get Quote

Manual Drum Lift

Manual Drum Lift

  • The manual drum lift is design to accompany AirClean® Systems bulk handling enclosures. The drum lift allows individual operators to raise bulk containers into the PowderSafe Bulk Handling Enclosure during raw sampling or packaging into smaller containers.

More Info Get Quote

Medi-Fect

Medi-Fect Disinfectant Wipes

  • Medi-Fect disinfectant wipes provide one-step disinfection/sanitization that starts killing on contact.

More Info Get Quote

Polypropylene Blowers

Polypropylene Blowers

  • AirClean® Systems offers injection-molded polypropylene blowers that meet the airflow demand of our full line of total exhaust laboratory fume hoods. These blowers are ideal for highly corrosive applications.

More Info Get Quote

QwikDry Drying Cloth Caddy

QwikDry® Drying Cloth Caddy

  • The caddy is designed to mount directly to a wall or other flat surface near the point of use.  The QwikDry caddy is constructed of powder coated metal and holds 100 individually packaged chevron pouches.

More Info Get Quote

QwikDry Drying Cloths

QwikDry® Ultrasound Probe Drying Cloths

  • This super absorbent pad effectively removes moisture from ultrasound probes without damaging or sticking to the ultrasound probe during the drying process. The QwikDry cloth is simple to use and is packaged in an easy to open chevron pouch.

More Info Get Quote

Sinks

Sinks

  • Polypropylene sinks are light weight and easy to install. Polypropylene is an ideal material for minimizing corrosion problems due to it's excellent chemical resistance. A variety of standard sizes are available.

More Info Get Quote

Slip Hatch Utility Access Port

Slip Hatch Utility Access Port

  • Designed primarily for power cord removal from a ductless fume hood, workstation or enclosure, the slip hatch utility access port can also be used to remove air hose lines and other tubing associated with laboratory applications. This feature is important to minimize eddy current within the safety product.

More Info Get Quote

Solucide

Solucide® Hard Surface Cleaner

  • Solucide® is an EPA registered hard surface cleaner, disinfectant, and deodorizer. Solucide® is a broad-spectrum disinfectant spray that is effective in the presence of organic soil. Solucide® contains no alcohol or glutaraldehyde and has a fresh lemon scent.

More Info

SDS Sheet Get Quote

Stainless Steel IV Bar

Stainless Steel IV Bar

  • The stainless steel IV bar can be added to any standard AirClean® Systems vertical laminar flow hood or clean bench enclosures. Designed to provide a sturdy and effective position to hang the bags during IV prepare.

More Info Get Quote

Stands

Stands

  • Our white, epoxy-coated stands are engineered and designed to support AirClean® Systems' workstations. The stands are constructed of 1.5″ tube stock 14-guage cold-rolled steel. They are designed to be flat packaged and assembled onsite by the end user.

More Info Get Quote

TEEZyme Sponges

TEEZyme™ Enzymatic Sponges

  • TEEZyme has a neutral pH, multi-tiered enzymatic detergent, formulated to remove gross contaminants while targeting insoluble polysaccharides that encase biofilm, exposing them to the high-level disinfectant utilized in the AirClean Systems AC-TE-50 TEE Soaking Station.

More Info

SDS Sheet Get Quote

TEEZyme Sponge Caddy

TEEZyme™ Sponge Caddy

  • The caddy is designed to mount directly to a wall or other flat surface near the point of use.  The TEEZyme caddy is constructed of polypropylene and polycarbonate and designed to hold twenty-five individually packaged sponges.

More Info Get Quote

Unvented Base Cabinets

Unvented Base Cabinets

  • Base cabinets, with a variety of shelving options, are available to suit each AirClean® Systems polypropylene fume hood. Constructed completely of polypropylene, these cabinets are ideal for storage of corrosive chemicals.

More Info Get Quote

Vented Base Cabinets

Vented Base Cabinets

  • Base cabinets, with a variety of shelving options, are available to suit each AirClean® Systems polypropylene fume hood. Constructed completely of polypropylene, these cabinets are ideal for storage of corrosive chemicals. These cabinets may be vented into the corresponding hood to prevent excessive fume buildup in the base cabinet.

More Info Get Quote